Cookshack FEC100 Посібник оператора - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник оператора для Духовка. Cookshack FEC100. Cookshack FEC100 12 сторінок. Fast eddy’s barbeque oven

1.800.423.0698

SETTING THE COOKING TEMPERATURE

Your FEC100 has the new Cookshack IQ4 control system. This controller has the same great cook &
hold features as the previous models of the IQ controller, but with an additional feature that allows you
to cook with a meat probe. This optional probe plugs into the unit and allows you to set the internal tem-
perature to which you want the product cooked. If you did not purchase the meat probe with your unit,
call Cookshack Customer Service at (800) 423-0698 to order your probe.

Directions for using the Controller

1.Turn Master Switch ON.
7. If using the Probe Mode, set probe temperature by pressing and holding the PROBE TEMP button
while using the ADJUST TIME OR TEMP buttons to change settings.
8. Set holding temperature by pressing and holding the HOLD TEMP button while using the ADJUST
TIME OR TEMP buttons to change settings.
9.Press START
To use the meat probe, simply insert the jack into the covered RCA receptacle on the controller panel.
Run the probe cable into the oven on the hinge side of the door, and place the probe into the thickest
part of the meat. (Be certain that the tip of the probe is not touching a bone.) Shut the door when this is
done. The oven will cook at the set cooking temperature until the internal temperature of the meat
reaches the temperature at which the probe is set. At that point the controller will change to the set hold-
ing temperature and remain there until the unit is manually shut down. An audible signal indicates that
the cook cycle is complete and that the oven is going to the Hold Temperature Mode.
When the controller switches into the Hold Temp (regardless of cooking mode) the set Hold Temp will
be maintained until the controller is manually shut off.
FAST EDDY MODEL FEC100
www.cookshack.com
2.Choose the desired mode by pressing the MODE button while
simultaneously pushing the up or down arrow until the desired
mode flashes: Cook Mode for standard operation, which auto-
matically drops into the preset hold temperature after the pre-
set cooking time is reached; Probe Mode if cooking with the
optional meat probe. The default mode is Cook Mode.
3.If using the Cook Mode, set cooking time by pressing and
holding the COOK TIME button while using the ADJUST
TIME OR TEMP buttons to change settings.
4.Set cooking temperature by pressing and holding the COOK
TEMP button while using the ADJUST TIME OR TEMP but-
tons to change settings.
5.Set holding temperature by pressing and holding the HOLD
TEMP button while using the ADJUST TIME OR TEMP but-
tons to change settings.
6. Press START.
5
Ver. 06.1