AUSTRALIAN MONITOR AMPRO PM16 Посібник з монтажу та експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Музичний мікшер AUSTRALIAN MONITOR AMPRO PM16. AUSTRALIAN MONITOR AMPRO PM16 16 сторінок. Performance mixing consoles pro series
Друкувати сторінку
STEREO CHANNEL SECTION
AUX 2
25
This is derived after the EQ and channel fader (POST FADER, POST EQ), and follows any changers in fader level. Normally used to
drive effects processing units which are fed back into the mixer and which must track the channel fader. The AUX feed is a mono
sum of both left and right audio signals.
PAN
26
Post fader and routes signal proportionally to the left and right outputs.
MUTE
27
Press to mute the channel.
CHANNEL FADER
28
Adjusts the level of the signal for the main left/right mix. Normal operating position is at the "O" mark.
SIGNAL PRESENCE METER
29
4 LEDs indicate a signal level at the insert return point, pre-fader.
PFL
30
Monitor the channel with the PFL button. When the PFL switch is depressed, the adjacent LED will illuminate indicating PFL is active. The
signal is routed to both the main signal presence meters and the headphone output, allowing both visual and audible monitoring of the
signal.
PAGE 8
AMPRO PM12 & PM16 INSTALLATION & OPERATION MANUAL
25
26
27
28
29
30