4RF Aprisa XE Технічний документ - Сторінка 3
Переглянути онлайн або завантажити pdf Технічний документ для Мережеве обладнання 4RF Aprisa XE. 4RF Aprisa XE 15 сторінок. Radio link
Також для 4RF Aprisa XE: Посібник із швидкого старту (2 сторінок), Посібник із швидкого старту (2 сторінок)
Друкувати сторінку
1.
Radio Clocking
1.1.
Introduction
This Technical Paper gives information on how to setup the clocking for the Aprisa XE radio in various
network configurations.
Setting the Aprisa XE clocking correctly is one of the most important aspects of network configuration.
Due to the versatility of the Aprisa XE it can be used in a number of different applications. This Technical
Paper has been created so that these situations can be better understood and the Aprisa XE set up
accordingly in your network.
All clocking configuration is done via the Aprisa XE SuperVisor software. See the Aprisa XE manual for
more detailed information on how to connect to an Aprisa XE radio via Ethernet.
This Technical Paper covers software version 8.2.10 and earlier.
Once SuperVisor is open radio clocking options can be accessed from the Clocking menu, as shown in
figure 1 below.
Figure 1 : Clocking Menu
Aprisa XE Clocking Technical Paper
3 | 15
Issued by: 4RF Customer Services 13 February 2009