AUSTRALIAN MONITOR ICON-3 Посібник з монтажу та експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Мікрофон AUSTRALIAN MONITOR ICON-3. AUSTRALIAN MONITOR ICON-3 8 сторінок.

Друкувати сторінку

SETTINGS

The ICON-3 Paging Station under side provides a single bank of DIP switches for

address selection and future options. The adjustable potentiometer VR1 provides

ﬁ ne adjustment of the microphone audio level.

SW1:

Only two RS485 addresses are valid when using the ICON-3 with Zone

Revolution.

Address 1: Page Station 1

Address 2: Page Station 2

Ensure that each ICON-3 is addressed correctly as per the diagram above.

NOTE: DIP switches 5 & 6 must be in the OFF position when used with Zone

Revolution.

PAGE 6

VR1:

The adjustable trim-pot provides a method to trim the microphone audio gain

to suit the intended application. By default, this level trim is set to a nominal

operating level. Adjustment of VR1 should be performed in conjunction with the

Audio Setup page within the Zone Revolution GUI application, ensuring the level

meters in the associated Input Processing pages are within acceptable limits

and free from clipping under normal and elevated voice levels.

ICON-3 MANUAL