4Sight 4SK606 Посібник - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник для Відеореєстратори 4Sight 4SK606. 4Sight 4SK606 20 сторінок.

While recording, pressing the UP button will mute the cameras

microphone. Pressing the UP button again will reactivate the

microphone.

Pressing the emergency event button while recording will

store the currently recorded video immediately, and a

protection mark will appear on the screen. The recorded video

files will then be locked, stored, and not deleted as to ensure

the completeness of your video.

The screen switch button can only be used when both lenses

***

are in use simultaneously. The user can switch between

displaying only lens 1, only lens 2, or displaying both

simultaneously. The switch screen button is useless when

only one lens is being used to record.

Using

When the unit is powered off and charging, the red indicator light

will illuminate. When charging is complete, the red light will go off.

While the unit is powered on, charging is indicated by the

appearance of a power chord in the top right of the screen.

- An initial charge of 6 hours is recommended.

- Leaving the Dash Cam constantly connected to the car charger

will not harm the battery.

- To charge the Dash Cam, connect the 12v car charger to your

car's 12v port and connect the other end to the Dash Cam.

- The Dash Cam is designed to automatically power on and

record when plugged in.

- The Dash Cam is designed to automatically power off and

save your video when unplugged