Austrian Audio OC818 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Мікрофон Austrian Audio OC818. Austrian Audio OC818 5 сторінок. Large-diaphragm condenser microphone with multiple polar patterns
Друкувати сторінку
Establishing the Bluetooth connection
After you open the app, click on "search for new devices" to connect to the OCR8. Enter the 6 digits
of the serial number (please include the "0" digits) that can be found on the sticker of the OCR8. This
is the password to identify that you have the right to connect to this device. (You do not want that
nerdy guy in the first row to connect to your microphone with his smartphone).
You can now start to work with the App's PolarPilot, which will give you full wireless control over the
OC818.
Tips for working with PolarPilot
We suggest you name your microphones first, especially if you own more than one (lucky you)!
Polar pattern:
You can change the polar pattern with the slider below the graphic. For small changes, you can also
use the ''-'' or ''+'' buttons. Please note that the microphone needs a few seconds to adapt to the
new pattern, especially if you switch all the way from figure-8 (left) to omni (right) or vice versa (this
gives any sluggish electrons time to catch up). Please also note that if you are using the slider, the
polar pattern will only start to adjust once you have released the slider!
High Pass Filter and Pad Switch:
The high pass filter and the pad switch can be remote controlled as well and work the same way as
the physical switches on the OC818. The physical switches on the OC818 are always inactive in Preset
Mode!
Override/Overload monitor:
At the bottom of the screen you will see the overload monitor. It will show an angry red bar if the
signal is too loud to be properly picked up by the microphone. In this case, you should use the "-10"
Pad Switch to resolve this issue. This will reduce bias voltage to the capsule and protect the mic's
internal circuitry from clipping.
Save Function:
You can save your favorite settings to easily retrieve them or program them into another OC818.
Please note that this setting is stored locally on your smart device.
Preset Mode:
If you unplug the OCR8, the OC818 will keep the latest pattern settings and store them in the "•"
(= Preset Mode) position. By setting the microphone to this position, you can always retrieve the
stored setting at any time, including Pad and High Pass settings.
Note that the hardware controls for Pad and High Pass on the microphone are overridden in Preset-
Mode and only become active again once you switch to another polar pattern position.
Using the PolarPilot as a Monitor:
If you do not switch the OC818 into the "•" (= Preset Mode) position and connect the OCR8, you can
still use PolarPilot as a monitor to see the pattern, pad and filter settings, as well as watching the
override monitor. Please note that you cannot make any adjustments unless you switch to "•"
(= Preset Mode) on the microphone.