Austro Flamm GUSSOFEN WIEN Посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник для Дров'яна піч Austro Flamm GUSSOFEN WIEN. Austro Flamm GUSSOFEN WIEN 16 сторінок.

Друкувати сторінку

english

Floor load capacity

Before the heating unit is installed, make sure that

the load capacity of the supporting construction is

sufficient to carry the weight of the entire unit.

3. CORRECT OPERATION OF YOUR STOVE

Initial startup of your stove

Your stove was treated with a special

environmentally friendly lacquer. The lacquer

surface is still soft at the time the stove is shipped.

The lacquer will harden when your stove is used

for the first time. The lacquer surface may not be

touched when it is heated for the first time. The

stove must be initially heated to a high temperature

for at least 1.5 hours. Visible vapors may appear

during the hardening of the lacquer. For this

reason it will be necessary to open windows during

initial operation in order let the vapors escape into

the outdoors.

PLEASE TAKE NOTE: It takes several heating

sessions before for your stove releases only the

pleasant smell of burning wood.

Approved Fuels

Dry, well cured and natural wood, wood briquettes.

Maximum Amount of Fuel

Maximum amount of fuel to be added: 4,8 kg wood

or 3,6 kg wood briquettes. Larger amounts of fuel

can lead to overheating and thus damage the

stove.

Clean Burning

The wood must be dry (relative wood moisture

< 15%) and untreated and the right amount of

wood must be burned in order to ensure a clean

fire that releases only small amounts of emissions.

The burning of rubbish especially plastic is

prohibited.

Making a Fire

Prepare everything you need for starting the fire—

soft wood chips, igniter materials (such as

Thermohit wood/coal igniter), uncoated paper,

wood.

Open the air slide all the way (see Figure 2).

Flue pipe connection

For your own safety stringent laws apply to the

connecting of the flue pipe to the chimney. Your

professional dealer or distributor knows these laws.

Please have your certified retailer carry out the

connection of your stove.

Open the stove door.

Lay uncoated paper on the floor of the firebox.

Lay soft wood chips onto the paper.

Lay one or two logs of wood on the wood chips.

Figure 3: Igniting the Fire

Light the paper.

Close the firebox.

Figure 4: Regulate the air slider

As soon as the wood logs are burning well, you

can regulate the heating capacity with the air

slider. (Slider set to the maximum ("AUF") setting

produces maximum heat – see Figure 2.)

When adding wood to the fire, follow the same

procedure as when igniting the fire: Open the air

slider, carefully open firebox door, lay wood on the

fire, close the firebox door.

Wait until the added wood catches fire and is

burning. Then regulate the air slider again.

WIEN