4x4 TOUGH ROOF RACKS Інструкція з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Автомобільні аксесуари 4x4 TOUGH ROOF RACKS. 4x4 TOUGH ROOF RACKS 8 сторінок. 4wd accessories
Друкувати сторінку
4.
Insert the mounting feet into the underside channel - one per side.
Secure the end caps onto the roof racks by tapping them over the aluminium channel end
5.
with a soft hammer for a secure t.
7.
Always ensure that the mounting bracket is correctly connected (A) to the roof rail.
Incorrect connection (B) can lead to unstable loads, causing a danger to other road users.
8.
When both roof bars are connected correctly, secure them
by locking with the security keys.
REMINDER:
Remove the keys once the roof bars have been secured
and store them in a safe place. DO NOT drive with the keys left in the lock.
9.
The load must be evenly distributed over the area of the carrier system (B), and the centre of
gravity of the load kept as low as possible. Narrow and heavy loads (example: metal tubes) are to
be carried near the feet of the carrier system. Loads which overhang the ends of the carrier
system (C) and shall conform to any relevant laws or by-laws in force, and shall be adequately
secured table loads, causing a danger to other road users.
A.
CAUTION: Do not use elastic straps to tie down load.
FOLLOW THE INSTALLATION STEPS TO INSTALL THE ROOF RACKS ONTO ANOTHER VEHICLE.
TRANSFERRING ROOF RACKS FROM ONE VEHICLE TO ANOTHER
Do not t onto roof rails that have a height or width of less than 15 mm or greater than 45 mm.
• Using the Allen key provided loosen the mounting brackets on all four clamps to open
the gripping arms wide enough to remove the bars from the raised roof rails.
A.
B.
B.
C.
7