Bender ATICS DIO Series Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Перемикач Bender ATICS DIO Series. Bender ATICS DIO Series 13 сторінок. Automatic transfer switching devices for safety power supplies
Друкувати сторінкуATICS-...-DIO Quick start
1
14
5. Dimensions
ATICS-2-DIO
234
***
52
176
115,3
220
**
222
Caution: Risk of destruction by plastering
Liquid plaster may run into the device and the device may jam.
►
Do not seal the device with plaster
6. Tools required
►
We recommend to use the following tools for connecting the
power section and the control cables:
2
2
3
4
5
13 12 11
10
9
14,7
M5
*
18
46
52
73,5
*
Additional space required for the auxiliary contact when using a bypass switch
**
Adapt the cutout to the terminal cover
***
Dimensions for screw mounting on mounting plate
**** Additional space required for the connector plug of the measuring current transformer
***** Version 80 A / 125 A. Version 160 A without connectors.
Transfer switching device ATICS-4-DIO
1.
Green plug connector for line 1
2.
Green plug connector for line 2
3.
Control buttons
4.
Inspection window for switch position
5.
Selector switch for manual mode selection, also shows the
switch position.
6.
Allen key for manual mode
7.
Transparent cover for changeover switch (manual mode), seal-
able
6
8.
Wiring diagram for lines 1, 2 and 3
9.
Three coded connector plugs
7
10. Locking device for switch position 0
11. Green plug connector for line 3
8
12. LCD
13. Operating and alarm LEDs
14. Connector plug for measuring current transformers
ATICS-4-DIO
340
***
52
104
****
15
324
326
ATICS® is suitable for DIN rail mounting or screw mounting on plate.
To guarantee the protection against accidental contact, it is to be in-
stalled behind a plastic cover.
• Torx® screwdriver T20 or 6.5 x 1.2 mm
• Screwdriver 2.5 x 0.4 mm
• Allen key 4 mm
***
176
14,7
115,3
M5
*
18
**
ATICS-DIO_D00080_02_Q_XXEN/04.2017
46
53
73,5