BENDIX ATR-2 ANTILOCK TRACTION VALVE Технічний бюлетень - Сторінка 2
Переглянути онлайн або завантажити pdf Технічний бюлетень для Блок управління BENDIX ATR-2 ANTILOCK TRACTION VALVE. BENDIX ATR-2 ANTILOCK TRACTION VALVE 2 сторінки. Relay valves from de-icing chemicals
Також для BENDIX ATR-2 ANTILOCK TRACTION VALVE: Технічний паспорт (12 сторінок)
Bulletin No: TCH-013-017
Protect Your Bendix
Subject:
De-icing Chemicals
WARNING!
Please READ and follow these instructions to
avoid personal injury or death:
When working on or around a vehicle, the following general
precautions should be observed at all times.
1. Park the vehicle on a level surface, apply the parking
brakes, and always block the wheels. Always wear safety
glasses.
2. Stop the engine and remove ignition key when working
under or around the vehicle. When working in the engine
compartment, the engine should be shut off and the ignition
key should be removed. Where circumstances require that
the engine be in operation, EXTREME CAUTION should be
used to prevent personal injury resulting from contact with
moving, rotating, leaking, heated or electrically charged
components.
3. Do not attempt to install, remove, disassemble or
assemble a component until you have read and thoroughly
understand the recommended procedures. Use only the
proper tools and observe all precautions pertaining to use
of those tools.
4. If the work is being performed on the vehicle's air brake
system, or any auxiliary pressurized air systems, make
certain to drain the air pressure from all reservoirs before
beginning ANY work on the vehicle. If the vehicle is
equipped with an AD-IS
reservoir module, be sure to drain the purge reservoir.
Reference Service Data Sheets:
ATR-1
ATR-2
R-14
ACom
(Free downloads available on www.bendix.com)
ABS Repair and Diagnostics DVD . . . . . . . . . . . . . . . . . . . . . . BW2538
Visit the Literature Center on www.bendix.com for free downloads of Service Data
Sheets or to order copies.
For more information, contact your local Bendix representative
or the Bendix Technical Assistance Team at 1-800-AIR-BRAKE
(1-800-247-2725) Monday through Friday, 8:00 A.M. to 6:00 P.M. EST,
and follow the instructions in the recorded message. Or, you may e-mail
the Bendix technical assistance team at: [email protected].
©2008 Bendix Commercial Vehicle Systems LLC 7/08. All Rights Reserved. Printed in U.S.A.
Effective Date: 7/30/08
®
ATR-1
®
air dryer system or a dryer
™
Antilock Traction Relay Valve . . . . . . . . . . . . SD-13-4811 (BW1794)
™
Antilock Traction Relay Valve . . . . . . . . . . . . SD-13-4812 (BW1791)
®
Relay Valve . . . . . . . . . . . . . . . . . . . . . . SD-03-1064 (BW1431)
™
Diagnostics PC Software . . . . . . . . . . . . . . . . . . . . . . BW2329
Cancels: N/A
™
™
, ATR-2
and R-14
5. Following the vehicle manufacturer's recommended
procedures, deactivate the electrical system in a manner
that safely removes all electrical power from the vehicle.
6. Never exceed manufacturer's recommended pressures.
7. Never connect or disconnect a hose or line containing
pressure; it may whip. Never remove a component or
plug unless you are certain all system pressure has been
depleted.
8. Use only genuine Bendix
and kits. Replacement hardware, tubing, hose, fi ttings,
etc. must be of equivalent size, type and strength as
original equipment and be designed specifi cally for such
applications and systems.
9. Components with stripped threads or damaged parts
should be replaced rather than repaired. Do not attempt
repairs requiring machining or welding unless specifi cally
stated and approved by the vehicle and component
manufacturer.
10. Prior to returning the vehicle to service, make certain all
components and systems are restored to their proper
operating condition.
11. For vehicles with Antilock Traction Control (ATC), the ATC
function must be disabled (ATC indicator lamp should be
ON) prior to performing any vehicle maintenance where
one or more wheels on a drive axle are lifted off the ground
and moving.
Page: 2 of 2
®
Relay Valves from
®
replacement parts, components