BENDIX SR-5 TRAILER SPRING BRK VALVE Інструкція з монтажу Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Блок управління BENDIX SR-5 TRAILER SPRING BRK VALVE. BENDIX SR-5 TRAILER SPRING BRK VALVE 6 сторінок. Trailer spring brake valve
Також для BENDIX SR-5 TRAILER SPRING BRK VALVE: Посібник (10 сторінок)
Друкувати сторінку
RECALL DOCUMENTATION
After finishing the Bendix
the Recall Claim Form (4) provided. This documentation is
required for labor reimbursement and for NHTSA completion
verification.
RECALL GUIDELINES
Note: Bendix SR-5 valves with a green or black tie wrap
through the identification hole in the body have already been
repaired. No further servicing is required. (Refer to Figure 2.)
The SR-5 valves covered by this campaign can be identified
by the supplier code and the date of manufacture located on
the valve body. Verification of both is required to determine if
the valve is a part of the campaign. Valves covered by this
campaign must meet the following criteria:
1. The supplier code – "IKD" – located as shown in Figure 9;
and
2. The date of manufacture between January 1, 2014 and
March 4, 2016, inclusive. To verify the date code see
INTERPRETING THE DATE CODE below.
INTERPRETING THE DATE CODE
A date code is stamped (not cast) on the SR-5 valve body
housing. Locate the date code – removing the paint coating,
if necessary – to read the code. Disregard the Work Team
Number, Shift of Manufacture, Manufacturing Plant and Shift
Serial Number codes shown in gray below. The portion of the
date code that determines the date of manufacture is highlighted
and can be interpreted as follows:
•
The first field is the month (A = January, B = February, etc.
– excluding the letter I – so that J = September, and so on),
•
The next two fields are the day of the month (e.g. 01 = 1
•
The next two fields are the year (e.g. 14 = 2014).
SR-5
valve repair, complete
®
™
Valves included in this field action were
manufactured during the period:
January 1, 2014 through March 4, 2016
That is, A 01 14T through C 04 16T
Month – A through M
Work Team
Number
); and
st
(Optional)
Shift of
Manufacture
(Optional)
Figure 9 – Recall Identification
Date Code
Supplier
Location
Code Location
Bendix SR-5 Valve
Skipping I
14, 15, or 16
_1 A 01 14 T SSS
Day of Month
01 through 31
Year
Shift
Serial Number
(Optional)
Manufacturing
Plant
5