BENDIX ST-3 Посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник для Блок управління BENDIX ST-3. BENDIX ST-3 4 сторінки. Safety valve
Також для BENDIX ST-3: Посібник із швидкого старту (4 сторінок)

Друкувати сторінку

4. If the work is being performed on the vehicle's air

brake system, or any auxiliary pressurized air sys-

tems, make certain to drain the air pressure from

all reservoirs before beginning ANY work on the

vehicle. If the vehicle is equipped with an AD-IS

air dryer system or a dryer reservoir module, be

sure to drain the purge reservoir.

5. Following the vehicle manufacturer's recom-

mended procedures, deactivate the electrical

system in a manner that safely removes all

electrical power from the vehicle.

6. Never exceed manufacturer's recommended

pressures.

7. Never connect or disconnect a hose or line con-

taining pressure; it may whip. Never remove a

component or plug unless you are certain all

system pressure has been depleted.

8. Use only genuine Bendix

ponents and kits. Replacement hardware, tubing,

hose, fittings, etc. must be of equivalent size, type

and strength as original equipment and be

designed specifically for such applications and

systems.

9. Components with stripped threads or damaged

parts should be replaced rather than repaired. Do

not attempt repairs requiring machining or weld-

ing unless specifically stated and approved by the

vehicle and component manufacturer.

10. Prior to returning the vehicle to service, make

certain all components and systems are restored to

their proper operating condition.

replacement parts, com-