Agria 5500 CT Посібник із швидкого старту - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Газонна та садова техніка Agria 5500 CT. Agria 5500 CT 8 сторінок. Tool carrier
Друкувати сторінку5500 CT
Quick start guide
Coupling and decoupling Implements
Mount and dismount attachments only with engine switched off !
1. Disconnect PTO shaft (attachment)
= move lever (4) to pos. "0"
2. Ensure clean surfaces
PTO shifting
Shifting PTO requires pulling the clutch! Do not shift the PTO by force or without pulled clutch!
If necessary pull and release the clutch to bring the gears in easy switchable position!
Connect fork end of shift rod
and shift lever with screw and bolt
(do not pull tight for free move)
5500 644
Slide pegs (2) of tool carrier
into hooks (3) of attachment
make sure attachment is properly
centred and flat fitted
To disconnect PTO shaft,
pull lever
Page 6 of 7
Fold both eye bolts (1)
over coupling flange
tighten cap nuts evenly
To connect PTO shaft,
push lever
998 592a_GB 08.10