AirCom B3000 Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Контролер AirCom B3000. AirCom B3000 4 сторінки. Filter regulator made of stainless steel throughout, up to 80 bar
Також для AirCom B3000: Посібник з експлуатації (2 сторінок)
Друкувати сторінку
B548-S Miniature filter pressure regulator with manual drain
3. Problem:
Flow rate too low
Possible cause: The filter element is soiled.
Measure: The filter element needs to be cleaned or replaced.
4. Problem:
Leak near or at the drain
Possible cause: Manual drain valve is loose; semi-automatic or automatic drain valve is soiled
Measure: Screw manual drain valve in tight; disassemble semi-automatic or automatic drain valve and clean or
replace.
5.3 Spare parts
Only original spare parts may be used for repairs. Replacements are to be carried out only by trained personnel. You
can find spare parts at www.aircom.net.
5.4 Repairs
Defective devices can be sent in to AirCom Pneumatic GmbH. After a thorough inspection, a cost estimate is
created with results of the inspection.
Filter pressure regulators that are not used with compressed air or neutral gases need to be cleaned or
purged with inert gas before they are sent in. Additionally the medium used as well as a fault description
needs to be listed in the cover letter.
Dok-Nr.: BA-B548-S
Page 4 of 4
Created on 2022-04-20