dymax BlueWave MX-275 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Освітлювальне обладнання dymax BlueWave MX-275. dymax BlueWave MX-275 16 сторінок. Emitter
Також для dymax BlueWave MX-275: Посібник користувача (20 сторінок)
Друкувати сторінку
6
BlueWave® MX-275 Emitter User Guide
Unpacking
Upon arrival, inspect all boxes for damage and notify the shipper of box damage immediately.
Open each box and check for equipment damage. If parts are damaged, notify the shipper and
submit a claim for the damaged parts. Contact Dymax so that new parts can be shipped to you
immediately.
WARNING!
via the interconnect cable it is susceptible to ESD damage, handle according to
ESD standards using a ground strap and do not touch exposed connector pins.
The parts below are included in every package/order. If parts are missing from your order,
contact your local Dymax representative or Dymax Customer Support to resolve the problem.
Parts Included
▪
LED Emitter Assembly
▪
User Guide
Installation
The BlueWave® MX-275 emitter is part of a BlueWave® MX-series curing system and requires
connection to a controller via an interconnect cable for proper operation.
Important Information
▪
Do not connect any components while power is applied.
▪
Mount the BlueWave® MX-275 emitter to a rigid support, such as the emitter stand
PN 42390, prior to connecting the interconnect cable to prevent handling damage.
▪
Do not touch the emitter aperture glass. This can result in poor performance and
broken glass due to heating. Inspect before each use and clean with isopropyl
alcohol if contaminated.
▪
If emitter aperture glass is permanently contaminated it must be replaced for safe
operation.
Until the BlueWave® MX-275 emitter is attached to a controller