GABOR CP-8 Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Стелажі та підставки GABOR CP-8. GABOR CP-8 10 сторінок. Fixed 1.5 npt mounting plate
Друкувати сторінку
Safety Warnings
•
When installing this product, be sure to
refer to the mounting instructions
detailed in this manual; failure to abide
by the mounting instructions may void
the product's warranty.
•
Do not exceed the maximum weight
limit, as this can result in serious
personal injury or damage to
equipment. It is the installer's
responsibility to make sure all
components attached to the Gabor
Mounting Plates do not exceed 500
pounds (226 kg).
•
The 500 pound weight capacity of the
Gabor Mounting Plates may be limited
to the lowest weight capacity of any
component located between the Gabor
Mounting Plates and the supporting
structure.
•
Do not attach to vertical supports such
as walls or angled ceilings.
•
Do not use this product for any 1.5 NPT
mount or extension columns other
than what it is intended for; the exact
specifications, size parameters, and
weight limits are found both on the
product box and in the instruction
manual.
•
It is strongly recommended that this
product be installed by a qualified
professional or installation contractor;
Gabor takes no responsibility for any
product damage or personal injury
resulting from mishandling, incorrect
mounting, faulty assembly, or
improper use of this product.
•
The Fixed 1.5 NPT Mounting Plates are
intended to be used with a 1.5 NPT
threaded extension column (not
included).
•
The Gabor Mounting Plates are
designed to be mounted to a 2 × 6-inch
wood studded ceiling covered with
5/8-inch drywall; or into an
8-inch-thick concrete ceiling using
either 1/4- to 2½-inch lag bolts with
anchors (not included) or 5/16- to
2½-inch lag bolts with concrete
anchors (not included); or suspended
from four 3/8-inch Grade 2 or better
threaded rods (not included) which are
secured to a framing channel (not
included) spanning a maximum five
feet by Grade 2 or better 3/8-inch
channel nuts (not included).
•
Do not mount the device on structures
that may be affected by vibrations or
noticeable impacts; do not install near
a heater, fireplace, or any other source
of direct heat energy.
•
This product may contain small parts
which can possibly pose a choking
hazard; keep out of reach of children
and pets.
•
Excessive exposure to liquids may
damage the finish of this product;
when cleaning this product, use only a
mild detergent solution, and quickly
wipe dry with a soft cloth.
•
All images are for illustrative purposes
only.