GABOR DMS-202 Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Стелажі та підставки GABOR DMS-202. GABOR DMS-202 13 сторінок. Mainmast dual display desktop monitor stand

Друкувати сторінку

Cable Organization

After the monitors are installed, keep your

cables neat and organized by running them

through the cable channel in the center column.

Adjusting the Monitor

Height

Important! When adjusting monitor

height, hold the handle and hand grip

simultaneously. This will prevent the

monitors from accidentally rising too

quickly or tipping over.

With the monitors attached, hold

the lower hand grip and press the

lever towards the top handle.

Adjust the monitors to the

desired height, and release the

lever.

Monitor Tilt, Rotation, and Swivel

Swivel

For optimum monitor

position, the column

swivels 40° to the

left and right. Use

the top and bottom

handles to position

the monitors at the

preferred viewing

angle.

Rotation

To change the

orientation of a

monitor from

landscape to

portrait, turn the

monitor while it's

attached to the

VESA plate.

Tilt

To adjust the

viewing angles, tilt

the monitors up or

down by 45°.

You may need to

increase the tilt

tension for larger

and heavier

monitors. Tighten

the tilt tension

screws by turning

them clockwise

with hex key (S).

For smaller and

lighter monitors,

decrease the tilt

tension by turning

the tilt tension

screws counter-

clockwise.