Dymo LabelManager 450D Швидкий старт - Сторінка 2
Переглянути онлайн або завантажити pdf Швидкий старт для Виробник етикеток Dymo LabelManager 450D. Dymo LabelManager 450D 4 сторінки. Dymo labelmanager user's guide
Також для Dymo LabelManager 450D: Посібник користувача (19 сторінок), Посібник користувача (20 сторінок), Посібник користувача (20 сторінок), Огляд (12 сторінок)
Друкувати сторінку
3. Inserting the Tape Cassette
Your label maker comes with one label cassette. You can purchase
additional tape cassettes from your local office supply retailer.
To insert the tape cassette
Press and release the tape cassette cover to open the tape
1
compartment. See Figure 3.
x
The first time you use the label maker, remove the protective
cardboard insert from the tape exit slot. See Figure 4.
Make sure the tape and ribbon are taut across the mouth of the cassette
2
and that the tape passes between the guideposts. If necessary, turn the
spool clockwise to tighten the ribbon.
Insert the cassette and press firmly until the cassette clicks into place. See
3
Figure 5 and Figure 6.
Close the tape cassette cover and press
4
You are now ready to print your first label. For complete details on how to
use the label maker refer to the LabelManager 450D User Guide.
4. Installing the Software
x
Do not connect the label maker to your computer until asked to do so
during the software installation.
To install the software on a Windows system
Insert the DYMO Label Software CD into your CD-ROM drive. After a few
1
seconds, the installation screen appears. If the screen does not appear:
Click Start and then Run on the Windows taskbar. The Run dialog
a.
box appears.
Enter D:\install.exe (where D is the letter of the CD-ROM drive)
b.
and click OK.
Select the language to install and follow the on-screen instructions.
2
To install the software on a Mac OS system
Insert the DYMO Label Software CD into the CD-ROM drive.
1
After a few seconds, the DYMO Label Software Installer icon appears.
Double-click the Installer icon and follow the instructions. See Figure 7.
2
If you do not see the label maker in the printer list when the installation is
complete, refer to the ReadMe file for instructions on how to add the label maker.
to turn on the power.
A
Figure 3
Remove
cardboard
insert
Figure 4
Figure 5
Click!
Figure 6
Figure 7