Dymo LabelWriter SE450 Label Printer Посібник із швидкого старту - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Виробник етикеток Dymo LabelWriter SE450 Label Printer. Dymo LabelWriter SE450 Label Printer 12 сторінок. Professional label printer for serial and usb connections
Друкувати сторінкуInstalling as a Serial ASCII Printer (Windows)
Plug the end of the serial cable with the RJ11 connector
1
into the serial port on the bottom of the printer. See
Figure 3.
Connect the 9-pin serial connector to an available serial
2
port on your computer or device, as appropriate.
Plug the power cord into the power adapter.
3
Plug the power adapter into the power connector on the
4
bottom of the printer.
Insert the cables through the cable channel.
5
When all the cables are connected, plug the power cord
6
into an electrical outlet.
Configure the printer port with the appropriate settings.
7
The printer default settings are:
Baud Rate: 9600
Data Bits: 8
Stop Bits: 1
Parity: None
Follow the instructions in "Loading Labels" on page 6 to correctly load labels onto the spool and
insert the spool into the printer.
10101
USB
10101
24VDC
Figure 3
24VDC
3