Dymo LetraTag Посібник користувача
Переглянути онлайн або завантажити pdf Посібник користувача для Виробник етикеток Dymo LetraTag. Dymo LetraTag 7 сторінок. Electronic labelmaker
Також для Dymo LetraTag: Інструкція з експлуатації (1 сторінок), Інструкція із застосування (1 сторінок)
Друкувати сторінку
Visit dymo.com for information on obtaining
tapes and accessories for your LetraTag.
Power Supply
• Insert six AA batteries, as shown in Fig. A.
• We recommend that you remove the batteries from the LabelMaker
if you will not be using it for some time.
Inserting the cassette
• The Labelmaker uses paper, plastic and metallic labels.
• Insert cassette as shown in Fig. B and press until it "clicks" into place - Fig. C.
• Check that the cassette is correctly placed before closing the access door.
The Display
• Shows up to 6 characters plus cursor and 5 indicators
Indicators show whether a feature is selected.
CAPS = capital letters
Function keys
ON/OFF
Switches the power on and off.
• The LetraTag will switch off if no keys are pressed for two minutes.
The last label will be automatically retained in memory.
Note: If the batteries are removed for more than a few seconds,
the memory will be lost.
CAPS
123456
= box/underline
B = BIG CAPS
STYLE B
USA
as shown below.
123
STYLE = outline/italic etc.
= shift key
AUS
NZ