Agria 5500643 Посібник із швидкого старту - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Сільськогосподарське обладнання Agria 5500643. Agria 5500643 8 сторінок. Tool carrier
Друкувати сторінку5500 CaneThumper®
Quick start guide
Coupling and decoupling Implements
Mount and dismount attachments only with engine switched off !
1. Disconnect PTO shaft (attachment)
= move lever (4) to pos. "0"
2. Ensure clean surfaces
PTO shifting
Shifting PTO requires pulling the clutch ! Do not shift the PTO by force .
If necessary pull and release the clutch to bring the gears in easy switchable position !
Connect fork end of shift rod
and shift lever with bolt
Handlebar adjustment
Height adjustment
loosen both lock nuts (A)
and hex head bolts (B)
bring the handlebar to desired height
fasten bolts and nuts
Slide pegs (2) of tool carrier
into hooks (3) of attachment
make sure attachment is properly
centered and flat fitted
To disconnect PTO shaft,
push lever
Page 6 of 7
Fold both eye bolts (1)
over coupling flange
tighten cap nuts evenly
To connect PTO shaft,
pull lever
Lateral adjustment
Pull ball handle (B/1) upwards
turn handlebar into desired
position / release ballhandle
07.07 B