Gacell CT-7000 Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Зарядний пристрій Gacell CT-7000. Gacell CT-7000 12 сторінок.
LED COMMUNICATION OF ABNORMAL RESULTS
No
LIGHT(S)
.
CONDITION
Solid Red Warning!
1
LED
Flashing Red
Warning! LED
2
+
Corresponding
charging mode LED
Slow flashing Red
Warning! LED
3
+
Corresponding
charging mode LED
Charging mode LED
is on, four battery
4
level indicator LEDs
are flashing
5
Solid yellow REPAIR
CAUSE(S)
Reverse Polarity
1) Open-circuit
2) Dirty Battery
Posts
3) Dead Battery
4) Output Short
Circuit
Charging in 12V
Mode(s) for 24V
battery
Overheat protection
In 12V REPAIR mode
8
SOLUTION(S)
Exchange the red and
black clamps or ring
terminals to the
correct battery posts
1) Connect the red
and black clamps or
ring terminals to the
battery posts
2) Clean the battery
posts
3) Replace the
battery with a new
one immediately
4) Disconnect red and
black output
terminals
Please do manually
press Mode button to
choose correct
charge mode.
CAUTION: If you
choose 24V Mode(s)
for 12V battery, the
12V battery will be
damaged!
Current reduces
when temperature in
charger is too high.
After cooling down,
charge will begin
------