Dymo M25 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Ваги Dymo M25. Dymo M25 19 сторінок. Digital usb postal scale

Using the Hold Feature

When an item being weighed extends over the front of the scale and you cannot see the

display, you can freeze the display so that the weight is still displayed after removing the item.

To use the Hold feature

1. Press

HOLD

The LED flashes and the display shows HOLD, and then 0.0 when ready.

2. Place the item on the scale.

After a few seconds, the LED stops flashing and stays illuminated.

3. Remove the item from the scale.

The LED stays illuminated and the weight continues to be displayed for about ten

seconds.

Changing the Units of Measure

Your scale can display weight in English (pounds) or metric (kilograms) units. The default unit

of measure is English. Each time you turn on the scale, the scale defaults to the unit of measure

that was last used.

To change the units of measure

♦

Press

to toggle between English and metric units.

Caring for the Scale

With proper care and handling, your scale will give you years of service. Keep the following in

mind when using your scale:

• Your scale works best when operated and stored at normal room temperature. Avoid

lengthy exposure to extreme heat or cold.

• Only operate the scale on a stable, vibration free surface.

• Exposure to dust, dirt, moisture, vibration, and air currents; and proximity to other

electronic equipment can affect the reliability and accuracy of your scale.

• Using the scale in proximity to wireless devices, such as mobile phones, can cause the scale

display to fluctuate when the device is in use.

• Although this scale is designed to be quite durable, gently place items to be weighed on the

platform. Avoid rough treatment, as this may permanently damage the internal sensor and

void your warranty.

• You can permanently damage the scale by placing significantly overweight items on the

scale platform.

• Avoid shaking, dropping, or otherwise shocking the scale. This is a precision instrument and

MUST BE HANDLED WITH EXTREME CARE.

• The scale has been calibrated at the factory and will not need to be calibrated again.