Benelec 02632 Інструкція з монтажу

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Антена Benelec 02632. Benelec 02632 2 сторінки. Mobile antenna

02632 Mobile Antenna Installation Instructions

Sedan Mounting

Remove the base locking nut from the antenna mounting base assembly body.

Insert the threaded neck of the mounting base assembly thru the centre of the Z bracket hole.

Relocate the locking nut over the thread on the mounting base assembly and using a spanner,

tighten the locking nut until it sits down on top of the Z Bracket.

Antenna

Fit the Z bracket to the vehicle as per instructions (supplied with bracket).

Route the feed cable through the vehicle to the appropriate location and fit mating adaptor to suit

radio.

Position the antenna onto the mounting base assembly and screw home until tight.

Check the VSWR to ensure that the connector has been fitted correctly.

Other mountings are available for this antenna - please refer to page 2.

Adaptor

Feed cable

Bull Bar Mounting

For Bull Bar mounting it is recommended that the antenna be located onto the

Benelec bracket models 02730,02731, or 02732 - see page 2.

Fit the bracket to the vehicle as per instructions.

Remove the base locking nut from the antenna mounting base assembly body.

Insert the threaded neck of the mounting base assembly thru the centre of the

bracket hole. Relocate the locking nut over the thread on the mounting base

assembly and using a spanner, tighten the locking nut until it sits down on top of the

bracket.

Position the antenna onto the mounting base assembly and screw home until tight.

Route the feed cable through the vehicle to the

appropriate location and fit mating adaptor to suit radio.

Check the VSWR to ensure that the connector has

been fitted correctly.

BENE L E C

Base Locking Nut

Base body

ANTENNA MOUNTING BASE ASSY

BENELEC.COM.AU

Antenna Mounted

on Z Bracket

Model 02734

Antenna Mounted on Bracket

Model 027303

(Page 1)

Antenna Mounted

on Bracket

Model 02732