GRE 800007 Інструкція з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Басейн GRE 800007. GRE 800007 20 сторінок.

Друкувати сторінку

Keep your manual with the serial number and the purchase justification (payment receipt) for

any type of reclamation.

Any reclamation against guarantee should be made by an

online declaration, via the www.grepool.com/en/after-sales,

together with receipt of purchase.

You may be asked for photographs to justify the claim.

No returns of material will be accepted without previous

agreement. The client will support all costs of all returns of

goods, (packaging and transport).

AFTER

VERIFICATION

AND

MANUFACTURING DEFECT

• The products that effectively show defects will be repaired or will

be replaced free of transport costs.

The guarantee is limited to the repair or replacement of the

defective part. It does not include, under any circumstance,

the payment of compensation for harm and damages.

THE GUARANTEE IS NOT APPLICABLE IN THE FOLLOWING

SITUATIONS:

• Use of materials that do not comply to our instructions.

• Damages caused by mishandling or an installation not complying

with the instructions.

IMPORTANT:

Manufacturas Gré interchanges components in exchange for others

to be verified.

If, after the verification no anomaly or dysfunction is detected,

Manufacturas Gré reserves the right to invoice the client for the cost

for transport and other diverse expenses.

DURATION OF THE GUARANTEE:

• Sylvester pinewood treated with class IV autoclave has a

guarantee of 10 years against rot and the attack of insects.

• Liner: 2 years for the seams and water tightness in normal

conditions of use. The guarantee does not include: Ripping, tears,

breakages, stains (caused by pouring treatment products directly into

the water), stains linked to the growth of algae, stains related to the

decomposition of foreign bodies in contact with the liner, stains and

decolouring resulting from the action of oxidising products, colour

maintenance and wear due to friction of the material over diverse

surfaces. Deformation of the liner that has been left without water

for 24 hours (never completely empty the pool).

You should keep the label with the serial number of the liner

that is on the product and on its packaging. This number

Loose parts available for 5 years counting from the product invoicing date.

GUARANTEE

CONFIRMATION

and a sample of the liner will be required for any eventual

reclamation against the guarantee.

• Stainless steel stepladder: 2 years. In the case of a filtration due

to salt electrolysis, the guarantee will not cover the stepladder.

• Filter group: The pump has 2 years guarantee (electrical problem),

in normal conditions of use. The guarantee does not cover breakage

of parts (pump base/sand deposit, pre-filter cover, multi-directional

trap...), wear due to a poor connection, use of the pump without

water, wear due to abrasion or corrosion (the filter group should

be located in a cool and dry position, kept protected from water

splashing).

• Other components: 2 years.

THE FOLLOWING IS NOT INCLUDED IN THE GUARANTEE:

Any machining done later and that negatively affects the quality of

the treatment, like for example, without any limitations, any cutting,

planing, sanding, or drilling. Exception: the holes needed for fixing

the reinforcements and wood blocks, which have been made using

drill of at least 1 mm less diameter of the assembly screws.

- Cuts in the liner

- The assembly and filter connection

- The assembly

- The filling with water

- Installation of the edges

- The wintering

- Maintenance

AFTER SALES SERVICE IN GUARANTEE:

(After justification and receipt of purchase)

• DELIVERY costs will be supported by the client.

• RETURN transport costs will be paid by Manufacturas Gré (for

those parts covered by the guarantee plan).

• Changing of wood after visual verification.

• Parts or components from Manufacturas Gré.

• Period for change: 8 business days In the context of replacing

a defective component, the disassembly and assembly is not the

responsibility of Manufacturas Gré.

AFTER SALES SERVICE WITHOUT GUARANTEE:

• Delivery / return costs will be supported by the client.

• The parts will be invoiced according to the current price list.