Adel Trinity 788 Посібник з експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Замки. Adel Trinity 788. Adel Trinity 788 12 сторінок. Biometric fingerprint door lock
Також для Adel Trinity 788: Посібник з експлуатації (12 сторінок)
Друкувати сторінку
- 1. Table of Contents
- 2. Assignment of Fingerprint and Password
- 3. Initialization of the Door Lock
- 4. Enrollment of Master Fingerprints / Member Fingerprints
- 5. Setup of Spare Password
- 6. Deletion of Fingerprints
- 7. Deletion of Password
- 8. Daily Use State
- 9. Use of Emergency Key
- 10. Use of External Power
- 11. Change of Batteries
Trinity 788 Operation Manual
Notes:
1. If the buzzer makes two short beeps, and the red indicator light flashes, the setup fails;
2. Each lock can only set 3 master fingerprints with code
can delete each other, open the door, setup passage mode, as well as authorize and setup or
delete the member fingerprints and spare password;
3. After successful enrollment of the first master fingerprint, continue operation while the LED
displays
0-
to enroll other fingerprints needed; or else the LED will stop display two
seconds later;
4. When inputting fingerprint code, you can press Button
re-input, or press Button
during operation to exit setup state;
*
5. Refer to
Notes
of
Right method to apply fingerprint
09
00-02 , and the master fingerprints
to cancel current operation and
*
(P 02) for operation
.
Trinity 788 Operation Manual
Enrollment of member fingerprints (take user
Operational procedure
Put the master finger that has been enrolled on
the fingerprint window and enter door open state
Press Button
+
to enter the enrollment mode
Press Button
+
or
-
to adjust the first digit
0
of the fingerprint code, and press Button
# to confirm the choice.
Continue to press Button
+
or
-
to adjust
the second digit
3
of the fingerprint code,
and press Button
#
to confirm
Press Button
#
to reconfirm
the fingerprint code
03
Put the finger to be enrolled on the fingerprint
collection window, and collect twice
Member fingerprint 03 is enrolled
03
as an example)
Indication of the lock
Green light is on, and the LED displays
the code of the master fingerprint
A beep sound heard, and the LED displays
0-
The figure just set jumps to the tens place,
and the ones place displays
0
The LED displays the fingerprint code
03 and
flashes alternately.
The LED displays fingerprint code
03
with
the red light on the fingerprint window is on
When the red light of the fingerprint window is on,
press with the finger; after the beep, remove the
finger and press one more time. A long beep will sound
and the two collections are successfully completed
Continue to set other fingerprints while the LED
displays
0- ; or else the display will stop
two seconds later, with green lights turn off.
10