Active Products ZE02 Посібник - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник для Мийка високого тиску Active Products ZE02. Active Products ZE02 18 сторінок.

WINTERIZING AND LONG-TERM STORAGE

Optimum Winterizing Procedure

Material required: Pump saver

Winterizing your pressure washer will help protect

and prolong its life. It is strongly recommend you

follow the below steps using a pump saver. This will

keep the internal parts lubricated, protected from

rust, and prevent the pump from freezing.

1. Connect the pump saver hose onto the adaptor

and quick-connect coupling.

2. Depress button on top of antifreeze container.

3. Continue until fluid exits the pump outlet.

4. Remove the hose from pump inlet.

Pump saver is available at your local hardware stores.

Alternative Procedure

If you cannot perform the Optimum Winterizing proce-

dure, you can still protect your pressure washer from

winter-damage:

1. Disconnect all water connections.

2. Turn on the machine for a few seconds. Press

trigger to bleed any remaining water in the pump.

Turn off immediately.

3. Remove the gun and hose from the pressure

washer. Drain any excess water. Roll hose care-

fully and do not allow hose to be kinked.

4. Store the machine and accessories in a room that

does not reach freezing temperatures. Do not

store near furnace or other hot areas.

Fig. 12