GAE GA1016 Посібник користувача продукту - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача продукту для Тюнер GAE GA1016. GAE GA1016 10 сторінок. High power e-h tuner

Product User Manual

Model GA101x Series High Power E-H Tuner

INSTALLATION

Upon arrival at the installation site the tuner should be thoroughly

inspected for damage or wear caused during shipping. Any visible

damage to the packaging material or the tuner itself should be

noted and reported immediately to the shipping company in

accordance with standard claims procedures. The following

components are included:

a) High Power E-H Tuner

b) Product User Manual

The high power E-H tuner can be connected to and used with any

common waveguide component having a compatible flange (see

below). Mounting can be in any convenient position and orientation

with either flange positioned towards the process load. Ideally, the

tuner should be located as close to the process load as possible.

Figure 1 illustrates a typical waveguide configuration.

Figure 1 – Typical waveguide configuration for process load

impedance tuning.

Both flanges of the E-H tuner must be properly connected to

another waveguide component. Bolts and nuts must be installed at

all flange bolt holes on both flanges prior to operation. Model

GA1014 is available with flanges designed for used with the

Page 6

Modesto, CA