GRE DPE10 Інструкція з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Сантехніка для ванної кімнати GRE DPE10. GRE DPE10 13 сторінок. Automatic garden shower-base

Друкувати сторінку

SHOWER INSTALLATION:

‐ Place the shower plate on a stable and horizontal surface.

‐ Connect the green adapter to the platform (Figure 1 and 2). Check the valve of the adapter that

controls the water flow is in ON position (Figure 3)

‐ Connect the garden hose (Figure 4)

‐ Open water source to 75% of maximum flow. If you need higher water height increase the water

flow. However, if the pressure is too high, the adapter might disengage from the platform.

‐ To test water height step onto center of platform, your weight will open the spray valves. If

water height is too low go back to water source and open your water valve more. To lower the

water height, adjust the valve on green adapter.

RECOMMENDATIONS:

During hot days, release some water from the garden hose before connecting to the platform to

avoid getting burned.

In winter you MUST empty completely the shower, and if you are unsure, we recommend to store

the shower inside your garage.

For normal use, the pressure of your water should be minimum 2 bars. For a pressure above 4 bar,

please use a pressure reducer.

Figure 1

Figure 3

Figure 2

Figure 4