Gage Bilt GB574 Оригінальна інструкція з експлуатації - Сторінка 14
Переглянути онлайн або завантажити pdf Оригінальна інструкція з експлуатації для Інструменти Gage Bilt GB574. Gage Bilt GB574 16 сторінок. Installation tool
Друкувати сторінку
Approved for use on Gage Bilt CE installation tools and/or other manufacturer's CE approved tools of similar design.
FASTENER
NAS4445
NAS4450
GAGE BILT CERTIFIES THE GB574 WILL INSTALL THE ABOVE FASTENERS
GB910 POWERUNIT
(Sold Separately)
GB912 POWERUNIT
(Sold Separately)
GB574/GB574A Installation Tool
GB574/GB574A ACCESSORIES
(Sold Separately)
NOSE ASSEMBLY SELECTION CHART
DIAMETER
1/4"
The GB910 Hydraulic Powerunit is a portable power source designed to operate a wide
range of hydraulic installation tools. The unit air powered, air actuated and delivers up to
10,000 psi (689.48 bar) working pressure. The actuator on the installation tool remotely controls
the hydraulic oil directional flow. The unit consists of a two position air hydraulic pump, four
way control valve and relief valve mounted on the reservoir.
The GB910 Hydraulic Powerunit is available separately or in kits including hydraulic quick-
disconnect couplers, air connectors, air lines and hydraulic hoses in various lengths.
GB910-12 includes the GB910 and 12 ft. (3.7m) Hose Kit-Air, part #910701
GB910-26 includes the GB910 and 26 ft. (7.9m) Hose Kit-Air, part #910705
GB910-38 includes the GB910 and 38 ft. (11.6m) Hose Kit-Air, part #910709
GB910-52 includes the GB910 and 52 ft. (15.8m) Hose Kit-Air, part #910714
The GB912 Hydraulic Powerunit is a portable power source designed to operate a wide range of
hydraulic installation tools. The unit air powered, air actuated and delivers up to 10,000 psi
(689.48 bar) working pressure. The actuator on the installation tool remotely controls the hydraulic oil
directional flow. The unit consists of a two position air hydraulic pump, four way control valve and
relief valve mounted on the reservoir. The rapid tool piston movement is obtained through a higher
(12 cubic inches a minute) output pump. Quick disconnect hydraulic couplings and air control
socket are included to attach the equipment hydraulic hoses and air control tube.
The GB912 Hydraulic Powerunit is available separately or in kits including hydraulic quick-
disconnect couplers, air connectors, air lines and hydraulic hoses in various lengths.
GB912-12 includes the GB912 Powerunit and 12 ft. (3.7m) Hose Kit-Air, part #910701.
GB912-26 includes the GB912 Powerunit and 26 ft. (7.9m) Hose Kit-Air, part #910705.
GB912-38 includes the GB912 Powerunit and 38 ft. (11.6m) Hose Kit-Air, part #910709.
GB912-52 includes the GB912 Powerunit and 52 ft. (15.8m) Hose Kit-Air, part #910714
Images may not reflect actual tool
14
STRAIGHT
KS08-574-22
1/18
Rev. 6/22