Dyna-Glo Signature DGSS443CB-D Посібник - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник для гриль Dyna-Glo Signature DGSS443CB-D. Dyna-Glo Signature DGSS443CB-D 15 сторінок. Heavy-duty compact barrel charcoal grill

Друкувати сторінку

ASSEMBLY INSTRUCTIONS

Attach the right shelf bracket (S) to the grill

body (G), using two M6 x 12 bolts (AA) and two

M6 nuts (BB), and insert the shelf support wire

into the bracket, as shown. Insert the shelf

supports into the left shelf bracket (R), before

securing the bracket with two M6 x 12 bolts (AA)

and two M6 nuts (BB).

Hardware Used

M6 x 12mm

Bolt

M6 Nut

10.

Attach the temperature gauge (B) by inserting the

probe through the threaded opening on the lid (A)

and turning clockwise. Do not remove the

pre-installed nut prior to attaching the gauge.

NOTE: The alignment of the temperature gauge

can be adjusted by turning the pre-installed nut

clockwise (or counter-clockwise) prior to installing.

Attach the lid handle (D) to the lid (A) using two

pre-installed bolts & nuts and flat washers

x 4