Gage Bilt GB585NT Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Електроінструмент Gage Bilt GB585NT. Gage Bilt GB585NT 8 сторінок. Installation tool

Друкувати сторінку
NOTE
Please read this manual
before servicing or using
this tool. Comply with
WARNINGS
and
CAUTIONS
prevent personal injury
or damage to tool.
WARNING
When operating installation
equipment, always wear approved
eye protection.
SPECIFICATIONS
Weight
Hyd. Pressure Req'd. - 5400-5700 psi PULL
Hyd. Power Source
Hydraulic Fluid
Setting Stroke
Rated Pull Load
DESCRIPTION
The GB585NT is a hydraulic installation tool capable of installing 5/8" and 3/4" Magna-Grip® or
standard lockbolts. It weighs just under 20 lbs. and is our most powerful hand tool. It has a 1.600"
rivet setting stroke and a rated pull load of 40,000 lbs.
The GB585 installation tool operates on hydraulic pressure developed by the GB902 Powerunit
set at 5400-5700 psi PULL pressure. The tool comes equipped with 24" hoses complete with quick
disconnects.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THE RIVETER AND MUST BE ORDERED
SEPARATELY.
to
- 20 lbs.
instructions).
- GB902 Powerunit
- Good quality hydraulic fluid.
- 1.600"
- 40,000 lbs.
(See GB902 manual for pressure setting