Gage Bilt GB150 Оригінальна інструкція з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Оригінальна інструкція з експлуатації для Заклепочні інструменти Gage Bilt GB150. Gage Bilt GB150 8 сторінок. Hydraulic hand riveter
Також для Gage Bilt GB150: Посібник (4 сторінок)
Друкувати сторінку
WARNING:
Any other use is forbidden.
The GB150 is a hydraulic hand operated installation tool designed specifically for the efficient installation of aerospace blind rivets
and all materials 1/8" diameter pull-thru nut plate fasteners thru 1/4". It weighs 20.5 oz. (.58 kg.) and can be operated in any position. It
has a .625" (15.88 mm) fastener setting stroke and a rated pull load of 3,500 lbs. (15.6 kN).
The GB105 installation tool has a two Valve, cylindrical hydraulic pump assembly, with pressure relief valve.
NOSE TIPS ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose tip selection chart on page 5 for
recommendations).
WARNING:
Do not operate in an explosive atmosphere.
The GB150 can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)
GAGE BILT : GB150 INSTALLATION TOOL
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Hand Held Weight
- 20.5 oz. (0.58 kg.)
Power source
- Hand operated. Two Valve, cylindrical hydraulic
Hydraulic oil
- Chevron AW Machine Oil 10 ISO-10
Setting stroke Max.
- .625" (15.88 mm)
Rated pulling force Max. - 3,500 lbs. (15.6 kN)
pump assembly, with pressure relief valve.
or equivalent
Rev. 10/22