Gage Bilt GB722 Оригінальна інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Оригінальна інструкція з експлуатації для Заклепочні інструменти Gage Bilt GB722. Gage Bilt GB722 20 сторінок. Installation tool
Також для Gage Bilt GB722: Посібник з монтажу (13 сторінок), Оригінальна інструкція з експлуатації (20 сторінок)
Друкувати сторінку
WARNING:
Any other use is forbidden.
The GB722 is a pneumatic-hydraulic installation tool designed specifically for the efficient installation of blind fasteners. It weighs
5.50 lbs. (2.49 kg) and can be operated in any position. It has a .590" (15.0 mm) fastener setting stroke and a rated pull load of 4700 lbs.
(20.91 kN) with 90 psi (6.2 bar) air pressure at the air inlet.
The GB722 installation tool operates on 90 to 100 psi (6.2-6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum efficiency.
At 90 psi. (6.2 bar) air pressure, the GB722 does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).
The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (SEE NOSE ASSEMBLY SELECTION
CHART ON PG. 18).
WARNING:
Do not operate in an explosive atmosphere.
The GB722 can be operated between 0ºF — 118ºF (-17.8ºC / 47.8ºC)
GB722 S/N: 1753 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Weight
- 5.50 lbs. (2.49 kg)
Air pressure req'd
- 90-100 psi. (6.2-6.9 bar)
Air consumption
- .16 SCF/cycle (4.53 L/cycle)
Hydraulic oil
- Automatic Transmission Oil,
Setting stroke
- .590" (15.0 mm)
Rated pull load
- 4,700 lbs. (20.91 kN)
Noise level
- 81.5 dB(A)
Vibration
- Tested– No Hazards Found.
Dexron III, or equivalent.
4
REV. 5/22