Gage Bilt GB752 Інформація про інструмент встановлення - Сторінка 4
Переглянути онлайн або завантажити pdf Інформація про інструмент встановлення для Заклепочні інструменти Gage Bilt GB752. Gage Bilt GB752 12 сторінок.
Також для Gage Bilt GB752: Оригінальна інструкція з експлуатації (20 сторінок), Інформація про інструмент встановлення (13 сторінок)
Друкувати сторінку
PRINCIPLE OF OPERATION
When the trigger is depressed, the pressurized air inside of the tool is released allowing spring pressure to
move the valve spool causing the air to be redirected. The air is directed to the top of the air piston, moving it
in a downward direction. The air below the air piston is then directed through the valve sleeve and exhausted
out of the bottom of the tool. Simultaneously, the piston rod connected to the air piston is also moving down,
forcing hydraulic oil up and into the front side of the cylinder head, causing the piston to move to the rear of
the cylinder head. The internal components of the attached nose assembly are also moving with the piston to
start the fastener installation.
pressure is then built up inside of the handle causing the valve spool to return to its original position and
reversing the sequence directing air pressure to the rear of the cylinder head, causing the piston to move to
the forward position.
CYLINDER
HEAD
OIL
PRESSURE
AIR
PRESSURE
AIR
PISTON
When the fastener installation is completed, the trigger is released. Air
HEAD
PISTON
PISTON
ROD
AIR
PRESSURE
VALVE
SPOOL
EXHAUST
Image may not reflect actual tool
AIR
PRESSURE
AIR
PISTON
AIR
PRESSURE
4
AIR
PRESSURE
AIR
PRESSURE
PRESSURE
REV. 4/13
AIR