Active Silicon AS-CIB-18HDMI4K-EVAL-A Посібник із швидкого старту - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Цифрова камера Active Silicon AS-CIB-18HDMI4K-EVAL-A. Active Silicon AS-CIB-18HDMI4K-EVAL-A 9 сторінок.
Друкувати сторінкуUsing the HarrierControl Application
Go to the Active Silicon website and find the
AF-Zoom HDMI 4K camera (downloads tab), and download the HarrierControl Application.
Unzip the HarrierControl folder and move it to a suitable folder on your PC.
The HarrierControl application is only supported on Windows 10. You may need to install the latest
drivers from FTDI. These are available here, please use version 2.12.28 of the drivers:
https://www.ftdichip.com/Drivers/D2XX.htm
The HarrierControl application is Windows 10 command line program that relies on several DLL files
also included in the HarrierControl folder.
The Harriercontrol application is run in a Windows 10 Command Prompt shell; this can be found
under Windows Start button in
Start->Windows System->Command Prompt
or you can search the applications/start for CMD.
Run the Command Prompt shell and change drive/directory to the HarrierControl folder.
Connect the Harrier 18x AF-Zoom HDMI 4K Camera to the evaluation board.
Using a HDMI cable or coaxial cable, connect the evaluation board to a suitable display/monitor.
Run Windows Device Manager and open the Ports (COM & LPT) list. You will see the COM ports
currently connected to your computer. Using the USB cable connect the mini USB socket (J6) on the
evaluation board to the PC.
Power-up the camera.
In the Windows Device Manager Ports (COM & LPT) list you will see the COM port of the camera
appear. Note the COM port number. Entering mode into the Command Prompt window will also list
all the available COM ports.
Figure 5. Windows 10 Command Prompt
application
September 2021
HARRIER 18x AF-ZOOM HMDI 4K CAMERA
Software
page, or the product page for the Harrier 18x
Figure 6. Typical Harrier HDMI 4K camera
COM port in Device Manager
QUICK START GUIDE
Version 1.0.0 - September 2021
Page 6 of 9