5th Wheel M2 Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Скутер 5th Wheel M2. 5th Wheel M2 18 сторінок.
Також для 5th Wheel M2: Інструкція з монтажу Посібник з монтажу (19 сторінок)

5th Wheel M2 Посібник користувача
LED Display
Headlight
T1
T5
Speed Unit
T7
Gear 2
Gear 1
T6
Total Mileage
Battery Indicator
M1 M2
18
Alert Cruise
Wireless
Control
Connection
T2
T3
T4
Real-Time Speed
T8
The pedestrian mode
M3
M4
M5
Power Switch
Short press the Power switch for 1 second to turn on the scooter, and long press the Power switch for 3 seconds to turn it off.
Gear Setting
Press the power button twice quickly to switch the gear. The gear can be set to Level 1 (max. 6 km/h, The
pedestrian mode), Level 2 (max. 16 km/h), and Level 3 (max. 25 km/h).
Speed control
When riding the scooter at a speed faster than 3km/h (1.86 mph), the throttle will get started and take effect. By
pressing the throttle, the user can control the riding speed. (Speed Range: 1-25km/h / 0.62-15.53 mph)
Brake control
Hold the left brake lever to brake. The greater the holding force, the greater the braking force. The indicator will
blinkinng under the condition of braking.
LED Headlight Switch
After switching on the scooter, click the LED headlight switch to turn it on.
Emergency Braking
When encountering an emergency, step on the rear brake with your foot. At this time, the rear wheel friction brake and
the front wheel electromagnetic brake can work at the same time. Under normal circumstances, do not use emergency
braking vigorously during high-speed driving, so as to avoid the riding risk or damage to the rear wheel. The company is
not responsible for the damage.
Tyre pressure
Before riding, please make sure the tyre pressure is no less than 2.8KPA. Otherwise, the mileage will decrease
Gear 3
each time. The tyre pressure may also be under the standard value, if the scooter is unused for a long time.
(This is applicable for the scooters equipped with pneumatic tires.)
Cruise control
The scooter is not initially configured with the cruise control speed. If necessary, open the mini program and
select the cruise control speed. When the scooter is running at the constant cruise control speed, the cruise
control will be enabled. After the cruise control is enabled, you can release the thumb accelerator, and the
scooter will automatically run forwards at a constant speed. Hold the left brake lever to disable the cruise
control. When the speed of the scooter reaches the set cruise control speed, the cruise control will be enabled
again.
You can set the status of no cruise in the mini program to disable the cruise control function.
Noise emission
The A-weighted emission sound pressure level of the vehicle in operation is less than 70 dB(A).
19