GREAT ARBOR GAC-152 Посібник користувача - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник користувача для Мережевий маршрутизатор GREAT ARBOR GAC-152. GREAT ARBOR GAC-152 20 сторінок. Gac-150 series wi-fi dial up router
Друкувати сторінкуG E T T I N G
S T A R T E D
Click the Wireless Security tab in the lower section to set encryption. The most secure
form of encryption is WPA2-PSK and the key can be a mixture of characters and letters.
If your device does not support WPA2-PSK, you can set the encryption to WEP.
However in the case of WEP, the key has to be
Save & Apply
the entries, click
For increased security, you can change the password for the router. Select
Administration
then
FIGURE 6
Admin Password Configuration Page
Optional: Scheduled Dial Up
The router can be configured to make a dial up connection at particular times of the day,
week, or month and the duration of the connection can also be specified. In order to
create a schedule, first set the TimeZone by clicking on the System Tab, selecting the city
in the same time zone as you desire and then clicking Save & Apply. Next, click on the
Services Tab and then on Scheduled Tasks. Type in the scheduled dialup command
(crontab) in the box (see examples below) and then click Submit. After that turn the
power off and then on to the router to enable the schedule. Note that the router does
not have a real-time clock and gets set with the correct time only after it connects to the
Internet after power on. So if power is lost then the router will reset to the factory set
time and the configured schedule will be affected till the router dials up for the first time.
Format of Scheduled Dial Up Command using Crontab
A crontab file has five fields for specifying the schedule:
*
*
* * *
-
-
- - -
|
|
| | |
|
|
| | +----- day of week (0 - 6) (Sunday=0)
|
|
| +------- month (1 - 12)
|
|
+--------- day of
|
+----------- hour (0 - 23)
+------------- min (0 - 59)
.
. Put in the new password, confirm it and click
command to be executed
month (1 - 31)
exactly 10
10
characters. After making
System
Save & Apply
and
.