Dawn Optics JR100 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Бінокль Dawn Optics JR100. Dawn Optics JR100 15 сторінок.

5 The Coin Operator Setting

It is used the mechanical coin operator that could recognize the diameter

and thickness of coins, and it was precisely set special for the local coins or

samples by professional engineer when the product leaves factory, so it is not

necessary to be set again by the user, except the sample could not be

recognized by coin operator or coin operated not smoothly as it is vibrated in

transportation, or affected by dirt and dust accumulation. Even if the

customers want to change different kinds of coin sample, they can set the

recognizer upon the mechanical size by themselves,

a. Loosen the adjusting screw near the coin slot ①，adjust the movable

stripper located at the back of coin slot according to the sample coin's

diameter, to where the suitable place is, can locks the coin larger than the

sample and passes the one of the same sizes as sample coin,

b. Loosen the adjusting screw ② of the coin alley, adjust the the movable

stripper up/down to the suitable size that allow the sample coin roll in

smoothly, the larger diameter coin lock and the smaller diameter coin can't

roll in operator but slip at the hook located at the refund button, to take the

refunded smaller/larger coin by press the refund button.

c. It is the same way to adjust the screw ③ according to the sample coin's

thickness, the setting on the width of coin alley is complied with the thickness

of the sample coin, then the larger and smaller coin will not be recognized and

could be returned by press refund button.

Notification: The mechanical coin operator was used that can recognized

the coin roughly, but the high precision setting upon the sample coin will

caused the coin not to be recognized and rolled in, for, the longtime of using

with normally vibration, expansion with heating and contraction with cooling,

even the dust and dirty things maybe cause the set sample coin was not

recognized and rejected, that is, the setting of precision of coin sample is

subject to the person's basic structure physical knowledge, it differs from man

- 12 -