Active Silicon AS-CIB-IP-002-A Посібник із швидкого старту - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Комп'ютерне обладнання Active Silicon AS-CIB-IP-002-A. Active Silicon AS-CIB-IP-002-A 13 сторінок. Harrier ip camera interface board
Також для Active Silicon AS-CIB-IP-002-A: Посібник із швидкого старту (7 сторінок)
Друкувати сторінкуQuick Start
1. Download the
2. Connect the correct power socket adapter to the multi-region power supply.
3. Connect the JST connector on the power adapter cable to J3 on the Ethernet Connection Board.
Connect the barrel connector plug on the multi-region power supply to the power adapter cable
barrel socket.
4. Connect the JST connector on the Ethernet interface cable (JST connector to RJ45 socket) to J2 on
the Harrier Ethernet Connection Board. Using a CAT5e/6 cable connect to a live network (with
DHCP server) by plugging the network cable into the Ethernet interface cable's RJ45 socket.
5. Connect the multi-region power supply to mains power. The board and camera will now power-up.
A blinking LED indicates network activity.
6. On a PC connected to the same network, use the ONVIF Device Manager application to locate the
camera and find out its IP address (open application, click on refresh). Make a note of the IP
address. Note: there must be an active DHCP server on the network otherwise the Harrier IP will
not have an IP address.
7. View the streaming video from the Harrier IP Camera Interface Board using the ONVIF Device
Manager or a suitable media player application (e.g. VLC media player or GStreamer).
Use rtsp://<IP address>:8554/quality_h264 to connect to the camera.
Figure 9. ONVIF Device Manager connected to Harrier IP camera
March 2023
HARRIER IP CAMERA INTERFACE BOARD
ONVIF Device Manager
from
https://sourceforge.net/projects/onvifdm/
QUICK START GUIDE
Version 1.04 – March 2023
Page 4 of 12