DAX DAX-8227 Посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник для Сантехніка для кухні та ванної кімнати DAX DAX-8227. DAX DAX-8227 5 сторінок. Bathroom faucet
Друкувати сторінкуINSTALLATION STEPS
As shown in figure, connect braided hoses and threaded rod to faucet body tightly (Note: Position as red braided hose on
1.
the left and blue braided hose on the right), slide lift handle into the slot at the back of faucet body, insert lift rod into the
hole at the bottom of faucet body and firmly connect with lift handle.
2.
Pass faucet body through hole of basin counter, pad rubber washer and locking washer in turn, tighten with hex coupling nut.
3.
Install drainage set and connect with lift rod.
4.
Connect braided hoses with triangle valves. Note: Position as hot left and cold right.
5.
Run water to check if the installation is qualified.
I N S TA L L AT ION G UID E
Faucet body
Basin counter
Threaded rod
Rubber washer
Locking washer
Hex coupling nut
Red braided hose
ww w. daxib.c
Lift handle
Lift rod
Hex wrench
Blue braided hose
om
D A X- 822 7