AirComfort DREAM EASY 6202QRB Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Внутрішнє оздоблення приміщень AirComfort DREAM EASY 6202QRB. AirComfort DREAM EASY 6202QRB 6 сторінок. Queen raised air mattress
Також для AirComfort DREAM EASY 6202QRB: Інструкція з експлуатації (2 сторінок)
Друкувати сторінку
ASSEMBLY INSTRUCTIONS
SETTING UP / STORING AWAY
INFLATING:
1. Check your surroundings for any sharp objects on
the ground/floor that may cause damage to the bed
(nails, screws, sharp rocks, etc.)
2. Remove the air mattress from its packaging, Unfold
and lay it flat on the floor.
3. Ensure the pump is in the "OFF" position.
4. Open the power cord compartment and connect the
pump cord to an electrical outlet.
5. Make sure the air inlet vents are clear of any
obstructions.
6. Turn the control dial clockwise to the "INFLATE"
position as shown.
7. When the air mattress reaches the desired firmness
rotate the control dial back to the "OFF" position as
shown.
8. Adjust the firmness by either continuing to inflate the
air mattress or turn the control dial to "Deflate" to let
some air out.
9. Unplug the power cord and store it in the power cord
compartment.
10.
DO NOT OVERINFLATE. INFLATE UNTIL THE
WRINKLES ARE ALMOST GONE, AND THE
MATTRESS IS FIRM.
DEFLATING/STORAGE:
1. Plug in the power cord and turn the control dial
counterclockwise to "Deflate" the air mattress
2. Allow the air mattress to completely deflate.
3. Unplug the power cord and place it back into the
storage compartment.
4. Make sure the mattress is clean and dry.
5. Lay mattress felt-side up and fold the mattress into
thirds, then roll up the mattress to release any
remaining air.
6. Place the airbed inside the storage bag and store in
a dry, cool storage location.
MODEL#6202QRB
Youtube Assembly Video:
https://www.youtube.com/watch?v=rWx2uvr1TH4
OPEN
SWITCH
Proper inflation of the air mattress:
• The ambient temperatures of air have an effect on the airbed
internal pressure. At low ambient temperature the air will contract
within the airbed and the airbed will feel softer: add air as
necessary.
• At high ambient temperature the air within the airbed will expand
significantly and the airbed will become hard and may burst:
release air to avoid damage to the airbed or to soften the feel.
• Do not expose the airbed to extreme temperatures (hotor cold).
• Stretching is a natural characteristic of new vinyl. During initial
use, the airbed may become soft and require additional inflation
to maintain desired firmness. This is normal for the first few days
of use.
• Dimensions shown are approximate and will vary due to the vinyl
temperature and the air temperature.
• In no event shall Air Comfort, their authorized agents or
employees be liable for damages (such as pin holes) to the
airbed caused by negligence, ordinary wear and tear, abuse and
carelessness, or external forces.
5