Dyna-Glo DGY784BDP Посібник - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник для Димова сигналізація Dyna-Glo DGY784BDP. Dyna-Glo DGY784BDP 15 сторінок. Vertical gas smoker

ASSEMBLY INSTRUCTIONS

5. Attach the lifting handles.

Insert 4 screws (AA) through the mounting

holes on one of the lifting handles (J) and

into holes on right side of smoker body (I).

Use a Phillips screwdriver to secure the

handles to the smoker body. Repeat on left

side.

Hardware Used

M6x12 Screw

6. Attach the side dampers.

Dampers (K) are installed from the inside of

smoker body (I). Thread the damper handle

through the back hole of the side damper slots.

Align the damper (K) with the mounting holes

and insert 4 screws (BB) from the outside of the

smoker body (I). Secure each bolt with nut (DD)

from the inside of the smoker body (I). Use a

Phillips screwdriver and wrench to tighten the

nuts and bolts. Do not over-tighten. Damper

must be able to slide easily from side-to-side.

Hardware Used

M6x12

Shoulder Screw

M6 Nut