Dyna-Glo DGY784BDP-D Посібник - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник для Димова сигналізація Dyna-Glo DGY784BDP-D. Dyna-Glo DGY784BDP-D 15 сторінок. Vertical gas smoker

ASSEMBLY INSTRUCTIONS

13. To install the "AAA" battery (N), remove the

igniter button by turning it counterclockwise

and inserting the "AAA" battery (N) with the

positive end facing out. Reinstall the ingniter

button by turning it clockwise and hand

tightening.

OPERATION INSTRUCTIONS

CONNECTING THE LP TANK

WARNING! ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED

TO PREVENT FIRE, DAMAGE AND/OR INJURY.

1. The knob on the LP tank must be closed. Make sure that the knob is turned clockwise

to a full stop. The cylinder supply system must be arranged for vapor withdrawal.

2. Check that the control knob on the control unit is turned off.

3. Remove the protective cap from the LP tank valve and coupling nut.

4. Hold the regulator in one hand and insert the nipple into the valve outlet. Be sure the nipple

is centered in the valve outlet. The coupling connects to the large outside threads on the

valve outlet. Use care – do not cross thread the connection.

5. Hand tighten the coupling clockwise until it comes to a full stop. Firmly tighten by hand only.

Do not use tools.

CAUTION: In the connection

process, make sure the regulator

inlet connector mates with the

cylinder valve outlet properly,

safely and ﬁrmly.

Straight