Great Lakes GL36SR Інструкція з монтажу Посібник з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Стелажі та підставки Great Lakes GL36SR. Great Lakes GL36SR 8 сторінок. 19" eia wall mount swing rack
Також для Great Lakes GL36SR: Інструкція з монтажу Посібник з монтажу (12 сторінок)

Great Lakes GL36SR Інструкція з монтажу Посібник з монтажу
PREFACE
This manual is provided to prevent service personnel from committing an act that
results in the risk of fire, electric shock, or injury. Only trained service personnel
should receive, unpack, and assemble the SR Swing Rack. In addition, only
trained service personnel should install equipment in the swing rack.

SAFETY SYMBOLS USED IN THIS MANUAL

This manual provides general safety guidelines to be observed during
installation, operation, and maintenance of the SR Swing Rack.
WARNING: Failure to follow directions in the warning could result in injury to
persons or loss of life.
CAUTION: Failure to follow directions in the caution could result in damage to
equipment or storage data.

SAFETY CONSIDERATIONS

WARNING: Improper handling and use of the SR Swing Rack could result in
equipment damage, serious injury, or possible death.
Only UL® Listed ITE (Information Technology Equipment) units should be
installed inside the SR Swing Rack.
Be sure to read and follow all individual manufacturer equipment manuals for
safety and installation instructions.
Proper spacing is required when installing electrical equipment to avoid
electrical shock.
Maintain minimum spacing between the accessories and components and
the computer enclosure assembly for safe operation of the equipment when
installed in accordance with the National Electric Code ANSI/NFPA 70-1999.
The ambient temperature operating range for the SR Swing Rack and
accessories is +50 to +95°F (+10 to +35°C).
The non-operating temperature is -4 to +140°F (-20 to +60°C)

INSTALLATION

Loading Equipment
WARNING: Only install equipment after the SR Swing Rack has been properly
secured. Do not move the SR Swing Rack assembly while loaded.
2