Hi-Force JCS10 Інструкція з експлуатації
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Валети. Hi-Force JCS10. Hi-Force JCS10 2 сторінки. Compact jacks - solid piston
Також для Hi-Force JCS10: Інструкція з експлуатації Посібник з експлуатації (12 сторінок)
Друкувати сторінку
Hi-Force Compact Jack Series: JCS and JCH
JCS Models have solid piston and are spring
assisted return.
JCH models have a hollow bore piston and are
gravity return.
JCS Compact Jacks:
JCH Compact Jacks:
All Hi-Force JCS and JCH series jacks are supplied
from the factory pre-filled with oil, and are ready
for use.
1.0 Inspection of the product upon receipt:
On receipt of the product, visually inspect the item
for any evidence of shipping damage. Please note
shipping damage is not covered by warranty. If
shipping damage is found notify the carrier
immediately and refrain from putting the product
into service. The carrier is responsible for repair and
replacement costs resulting from damage in transit
shipment.
2.0 Safety Precautions:
Read and follow all the instructions and safety
warnings carefully prior to use of the equipment.
Failure to do so could result in equipment damage
or failure of the equipment or personal injury. Hi-
Force will not be held responsible for any damage
to the equipment or personal injury resulting from
unsafe use of the product, lack of maintenance or
incorrect operation. If in doubt on the correct
usage of any Hi-Force equipment, contact your
nearest Hi-Force office or distributor. If the operator
has not been trained on high pressure hydraulic
equipment and its safe use consult your local Hi-
Force sales office who can offer you training
courses for operators.
Hi-Force Limited – Prospect Way – Daventry – Northants NN11 8PL – United Kingdom
Tel: +44(0) 1327 301000: Fax: +44(0) 1327 706555: Website: www.hi-force.com
INSTRUCTION MANUAL:
Model Series: JCS & JCH Compact Jacks
All operators should ensure that all necessary
personal protective equipment as specified by
their employer is worn when operating any
hydraulic equipment. Safety shoes, safety glasses/
visor and protective gloves should be worn at all
times. All relevant risk assessments should be
completed prior to use of the equipment.
Description:
This equipment is provided for the purpose of lifting
or lowering loads, or exerting a force, under the
control of a trained operator.
The equipment is supplied completely assembled
and ready for use. No service adjustments are
necessary or possible during operation.
An internal safety relief valve (factory set) is fitted
which limits the load that may be lifted to the
equipment rated load + 10% maximum.
Hydraulic Jacks must only be serviced by a
qualified technician.
To protect your warranty, only use Hi-Force's
hydraulic oil.
Immediately replace any worn or damaged parts
using genuine Hi-Force parts only.
Hi-Force JCS & JCH Jacks are despatched from the
factory pre-filled with oil, and are ready for use.
They can be used, if installed correctly, in any
position, for example sideways, upside down etc.
Available Models:
JCS Range:
JCH Range:
General Description:
The JCS jack has a solid piston and a spring to
retract the piston. The JCH jack has a hollow piston
to allow tensioning and pulling of studs etc, and the
piston must be pushed back manually or by the
load. Either style jack can be used, in any position,
Keep hydraulic Jacks away from flames and
direct heat.