Hi-Force TLE50 Series Інструкція з експлуатації Посібник з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Валети. Hi-Force TLE50 Series. Hi-Force TLE50 Series 18 сторінок.
Друкувати сторінкуUpon receipt of the product, visually inspect the item for any evidence of shipping damage. Please note:
the warranty does not cover shipping damage. Notify the courier immediately if shipping damage is found
and refrain from putting the product into service. The carrier is responsible for repair and replacement costs
resulting from damage that occurred in transit.
2.1 Introduction
Read and follow all the instructions and safety warnings carefully before handling, installation or
use of any hydraulic equipment. Failure to do so could lead to equipment damage, equipment
failure, personal injury or even death. Hi-Force will not be held responsible for any damage to the
equipment, injury or death resulting from the unsafe use of, lack of maintenance to, or incorrect operation
of the product. If in doubt on the correct use of any Hi-Force equipment, contact your nearest Hi-Force office
or distributor. Only qualified personnel should be allowed to operate hydraulic equipment. If an operator has
not been trained on high-pressure hydraulic equipment and its safe usage, consult your local Hi-Force sales
office or distributor who can offer training courses for operators.
2.2 Work Area Safety
•
Keep work areas clean and well lit. Cluttered spaces and inadequate lighting can result in
unnecessary accidents.
•
Keep bystanders clear of any hydraulic tool activity. Personnel working in close-range should be
made aware of all high-pressure work before commencing.
•
Ensure that the lifting device/s are placed entirely under the load and that lifting is parallel.
2.3 Electrical Safety
•
Electrical power plugs/ sockets MUST match the power source outlet socket. Never modify electrical
power plugs or tool/ equipment electrics.
•
DO NOT abuse cabling. DO NOT use electric cables to carry, move or disconnect tools. Make sure
electrical cabling is clear of heat sources, sharp edges or moving parts.
•
When using the unit outdoors, use a suitably rated extension lead (if required) to reduce the risk of
electric shock.
Operating Instruction Manual:
OM-TLE50-01
1.0 Inspection upon Receipt
2.0 Safety Precautions
3
From Serial Number:
All