6KU FIXIE Покрокове керівництво по створенню - Сторінка 4
Переглянути онлайн або завантажити pdf Покрокове керівництво по створенню для Мотоцикл. 6KU FIXIE. 6KU FIXIE 17 сторінок.
Друкувати сторінку
- 1. Table of Contents
- 2. Tools
- 3. Let's Get Started
- 4. Installing the Handlebar
- 5. Installing the Front Wheel
- 6. Aligning the Stem
- 7. Installing the Seatpost
- 8. Optimizing the Brake Pads
- 9. Preparing Pedals for Installation
- 10. Installing the Pedals
- 11. Pumping the Tires
- 12. Let's Finish up that Handlebar
- 13. Optional Fixed Gear/Freewheel
- 14. Contact Information
INSTALLING THE
HANDLEBAR
a.
Grab your 4mm Allen Key and
unscrew the 4 bolts from the stem's
faceplate.
b.
First, align the handlebar into place
on the stem.
c.
Next, make sure the brake levers
on the handlebar are facing away from
the bike and that the brake cables are
crossed.
d.
Finally, using your 4mm Allen Key,
loosely tighten the stem's faceplate
so that it gently holds the handlebar
in place.
(make sure the handlebar is
centered evenly across the stem. We
will fully tighten the handlebar later).
3