Great Lakes Biostar V Посібник з експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Стоматологічне обладнання Great Lakes Biostar V. Great Lakes Biostar V 16 сторінок.

Друкувати сторінку

Reminder: Do not use material thicker than 5.0mm within the clamping mechanism. This

may cause the Biostar to malfunction while pressure is in the chamber. Always wear safety

glasses when using this machine and during all fabrication procedures.

Maintenance

A regular maintenance schedule should be followed. Proper maintenance will assure better

fabrication results. Refrain from using water in the Biostar machine. Water may cause certain

components to rust or corrode. When the machine is not being used, engage the clamping

frame to the chamber and position the chamber on the pellet cup. This prevents lab dust from

entering the pellet cup and chamber.

The reflective surface of the pressure chamber

should be cleaned regularly with a damp cloth

to achieve optimum results.

Pellets will become dirty with regular use.

Clean pellets by placing them in a strainer and

rinsing with hot water. Spread pellets on a

towel and let air dry before placing them back

in the Biostar. Check pellets monthly, discard

and replace pellets in the bottom third of the

cup.

Also, clean the pellet drawer space to allow for

proper insertion of the drawer.