Daxten SCOUTUTP - Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу для Перемикач Daxten SCOUTUTP -. Daxten SCOUTUTP - 17 сторінок. Multi-platform kvm switch
Також для Daxten SCOUTUTP -: Брошура (2 сторінок)

Друкувати сторінку

General Settings

Select General and press ENTER , the General Settings window will appear.

From this window you can do the following:

Security

The OSD comes with an advanced password security system with 3 different

security levels. Each security level has different access rights to the system

and have are limited in number as shown below.

1 x Administrator (Status A)

Set and modify all Passwords and security profiles

Fully access any computer

Access all OSD functions

1 x Supervisor (Status S)

Fully access any computer

Access the following OSD functions only – F4 Scan, F5 Tune and F6 Moving the Confirmation

label.

6 x User (Status U)

Each User has a profile set by the Administrator that defines the access level to different computers.

Activating password protection

Only the Administrator can password-protect or disable the protection of the OSD as follows:

Navigate to the Security line and press the Space Bar to toggle between On and Off.

The password box appears. Type the Administrators password (default password is

admin).

Press Enter

Hot Key

Press the Hot Key and the OSD appears. To change the Hot Key to [ Ctrl Ctrl ] (CL on display),

[Ctrl , F11 ], [Shift , Shift ] (SH on display) or Print Screen.

Press the Space Bar to toggle between the different options. Once selected, press the new Hot Key

to display the OSD in the future.

Autoskip

To access only the active computer lines on the OSD you can use this feature.

To activate the Autoskip toggle between the options with the Space Bar.

Serial port

Serial port ON means the Control Management program can be used. To change the Serial port

settings, navigate to the Serial port line and toggle between the options using Space Bar.

Keyboard language

The default is US English which can be changed to German (DE) or French (FR) as follows:

Navigate to the Keyboard language line and toggle between the options using the Space Bar.

Switch name

You can substitute up to 18 characters in the line. A space constitutes a character. Give each switch's

OSD a different name.

Factory Default

To return to the factory default Settings you have to press F7 and all changes will be removed.